Cleantek manufacturing ring blower for aquaculture oxygen aeration purpose. Aeration is necessary for all mind of fish farms, Fish Ponds, all kind of artificial sea food farms. Electric Ring Blower supply sufficient oxygen contained air into water, its assures sufficient oxygen for fish.

A wet scrubber, also known as a wet scrubber system or a gas scrubber, is an air pollution control device used to remove pollutants from industrial exhaust gases or flue gases. It is widely employed in various industries, including power plants, chemical plants, refineries, and metal processing facilities. The basic principle of a wet scrubber involves the contact of contaminated gas with a liquid (usually water) in order to remove pollutants through various physical and chemical processes. The pollutants are absorbed or dissolved into the liquid, resulting in cleaner gas being released into the atmosphere. How a wet scrubber works: Gas and liquid contact: The contaminated gas stream is directed into the scrubber system, where it comes into contact with the liquid medium. 

The liquid is typically sprayed into the scrubber chamber in the form of fine droplets or dispersed as a mist. Pollutant absorption: The pollutants present in the gas, such as particulate matter (dust, smoke, or fumes) and acidic or toxic gases (sulfur dioxide, hydrogen chloride, etc.), interact with the liquid. Various mechanisms, such as diffusion, condensation, and chemical reactions, occur, leading to the absorption or dissolution of pollutants into the liquid phase. Scrubber design: Wet scrubbers come in different designs, such as packed bed scrubbers, spray tower scrubbers, or venturi scrubbers. Each design has its own configuration and operating principles, but all aim to maximize the contact between the gas and liquid phases to enhance pollutant removal efficiency. 

 Liquid treatment and recirculation: After the gas passes through the scrubber, the liquid now containing the absorbed pollutants is collected and treated separately. It undergoes processes like sedimentation, filtration, and pH adjustment to remove or neutralize the contaminants. In many cases, the liquid is recycled and reused within the scrubber system. Clean gas discharge: The treated gas, which has undergone pollutant removal, is released into the atmosphere through an exhaust stack or chimney. Depending on the specific regulations and requirements, the cleaned gas may still contain some minimal level of residual pollutants, albeit at much lower concentrations than before. 

 Wet scrubbers offer several advantages, such as high pollutant removal efficiency, versatility for handling different types of pollutants, and the ability to cool gases and control temperature. However, they require proper design, maintenance, and operation to ensure optimal performance and prevent issues like liquid carryover or scaling. Wet scrubber design can vary depending on the industry, pollutant characteristics. Take a call and consult with our engineers.

A portable welding fume extractor is a device designed to remove and filter welding fumes and smoke generated during welding operations. It is typically used in situations where fixed or stationary fume extraction systems are not available or practical, such as in construction sites or remote locations.The purpose of a portable welding fume extractor is to minimize the exposure of welders and surrounding personnel to hazardous welding fumes and smoke, thereby improving the overall air quality and ensuring a safer working environment. It is important to select an extractor that is appropriate for the specific welding processes, materials, and fume generation rates encountered in the particular application. Cleantek is leading manufacturers of best welding fume extractor in India.

Ring blower VS Roots Blower Comparison:

Ring blowers and Roots blowers are both types of positive displacement blowers commonly used in various applications for delivering high volumes of air or gas. Lets compare the two: Operating Principle: Ring Blower: Also known as regenerative blowers, ring blowers work on the principle of regenerative or centrifugal force. The impeller of the blower has multiple blades that push the air outward and create a pressure difference between the inlet and outlet, generating airflow. Roots Blower: Roots blowers, also called rotary lobe blowers, operate based on a pair of counter-rotating lobed rotors (usually three-lobed or two-lobed). As the lobes rotate, they trap and move the air from the inlet to the outlet, creating pressure and flow. Design and Noise: Ring Blower: Ring blowers generally have a simple and compact design, resulting in lower noise levels compared to Roots blowers. They are preferred in applications where noise is a concern. Roots Blower: Roots blowers have a more complex design due to the presence of rotating lobes and casing, which can lead to higher noise levels. Pressure and Flow Rate: Ring Blower: Ring blowers are suitable for applications that require low to medium pressure and flow rates. They are commonly used in ventilation, vacuum lifting, aeration, and pneumatic conveying systems. Roots Blower: Roots blowers are ideal for applications that require higher pressure and flow rates. They are often used in wastewater treatment, pneumatic conveying of bulk materials, and industrial processes requiring high air or gas volumes. Efficiency: Ring Blower: Ring blowers are generally more efficient at lower pressure and flow rates. Roots Blower: Roots blowers are more efficient at higher pressure and flow rates. Maintenance: Ring Blower: Ring blowers usually require less maintenance due to their simpler design and fewer moving parts. Roots Blower: Roots blowers may require more frequent maintenance due to the presence of lobed rotors and potential wear between the lobes and casing. Applications: Ring Blower: Common applications include air knives, spa and pool equipment, sewage treatment, and various industrial processes requiring moderate airflow. Roots Blower: They find applications in a wide range of industries, including wastewater treatment, cement conveying, chemical processing, and power generation.

Ring Blower Vs Roots Blower Comparison:

Cleantek ia an ISO 9001 -2015 certified Company Manufacturing Ring Blowers in Various airflow and Prassure capacity. Our Ring Blowers used in Air Agitation in Electroplating, Aeration in Fish Pond, Vacuum hold down, Degassing,  Etc...

Also Roots blower used in this field for above application. But many advantages available in ring Blowers.The following are the some of Ring Blower and Roots blower advantage and Disadvantages.

The Importance Of Oxygen In the Aquarium or Aquaculture Industry:

Fish,Prawns, Shrimps need to breathe Oxygen in water. Oxygen enter water by surfface agitation and Supply air threw pipeline inside water.Sufficient oxygen is required for fishes to live in water.Air blowers will lower CO2 levels through a chemical reaction.Air Blower provide enough oxygen for your aquarium. Aquaculture air blower supply oxygen to fish farms.Fish,Prawns, Shrimps need to breathe Oxygen in water. Oxygen enter water by aeration.

Cleantek Manufcaturing aquaculture air blowers for pond aertion in fish farms. Our Blowers are oil free and supply high volume air supply comparing the other vacuum pumps and compressors.Oxygen is must for fish alive, So our side channel blowers mostly used in fish farms, all kind of aqua farms, Sea Foods manufacturing plants. Variosu sizes of diffusers are used to with our blowers.
 

Wet & Dry Vacuum Cleaner:

Wet & Dry Vacuum Cleaner is efficiently suck the both wet and dry dust from floor surface. Multi stage filtration like HEPA filter etc..optional accessories available as per clients requirements. 

Cleantek design and manufacturing industrial heavy duty vacuum cleaners.Our model was developed to meet the requirements for vacuuming dust and powder, solid and liquid materials and is equipped with direct drive induction vacuum motor which requires no maintenance. It is made for heavy duty application. The frame with caster simultaneously provides for maximum stability and mobility of the industrial vacuum cleaner. The total unit is epoxy powder coated and total unit is attached with heavy duty portable wheels. This wet & dry vacuum cleaner Effectively separate the metal chips from liquids. 

Cleantek Vacuum cleaners are safe and easy to use and have higher efficiency than any other kind of manual tool cleaning like brooming etc. We supply powerful vacuum motor attached machine with useful attachments for easy and efficient cleaning.Our vacuum cleaners are used for multipurpose cleaning use like Home carpet cleaning, Water tank cleaning, Sofa and chairs cleaning, Car Interior cleaning etc...

Ring Blower Applications:

Cleantek manufacturing Ring Blower Siemens motor attached model with high efficiency for aeration in Biofloc and STP and ETP Plant. Cleantek make Heavy duty construction with copper winding motor blower for various pressure and vacuum applications.Impeller Fan are manufcatured with high quality aluminium alloy and digitally balanced.

The following industry using our blower for various air suction and air blowing applications. 

1. Suction Blower for Garments
2. Blower for Waste water Treatment
3. High Pressure Blower for Material Conveying
4. Blower for Printing machine
5. Dental Suction machinery
6. Aquaculture – Fish and Prawn pond Aeration & Bio floc Fish Pond Aeration
7. Waste water treatment, sewage treatment system.
8. Pneumatic conveying systems – Powders and Granules Conveying
9. Pharmaceutical machinery – Excess Powder Suction
10. Flame Proof Ring Blower
11. Flame proof Side Channel Blower
12. Garment machinery – Blowing and Hold Down Process
13. Woodworking machinery –Double Stage Ring Blower for Aeration
14. Double Stage Ring Blower for Aeration and Air Agitation in Electroplating and Sewage Treatment Plant
15. Wood Panel Hold
16. Plastic machinery – Plastic Granule conveying

Air Knife Blower:

An air knife is a pneumatic air tool used to blow off liquid or debris from products. Cleantek design and manufacturing various ranges of airknife with high pressure blowers suitable for drying and water and dust blowoff applications.Air knife used for drying water Particles from Bottle, Pouch, package,glass parts etc.

Air Knife Drying System is very useful for drying liquor bottles after filling. In Liquor production line after filling the bootles or canes are move to coding and labelling process. The wet moisture affect the printing quality and rejection of filled bottles and canes. Before reaching the labeling process bottles to be completely dried by our cleantek hig effective air knife system.
 

Portable Dust Collector Machine:

Dust Collector Machine Features:

• Compact in Size
• High Suction Power
• Multistage Filtration System
• Easy to Move
• Large Dust Collection capacity
• Low Noise Level
• Long Durability

             Cleantek manufacturing polishing machine builtin with dust collector, grinding and cutting dust collection system in compact size for individual machines. During grinding and cutting lot of fine metal dust produced with hot fire spark and it is very dangerous to workers and factory floor. Cleantek high quality dust extraction system assure 100 % safe working for this kind of machine.Our machines are used in bench grinders, polishing machines,Belt grinders, etc..

Cleantek supply dust collector with suction hoods, shrouds , custom made ductings etc.. suitable for client applications. Cleantek UDC models dust Collectors are suitable to extract the abrasive dust from any kind of Belt Grinders,Disc Sanders, Bench Grinders, Cutting Machines etc...

Cleantek manufacturing grinding, Polishing, Deburring and cutting dust collection system in compact size for individual machines.

Cleantek is one of the dust collector manufacturers in Chennai, bangalore. We manufacturing grinding, Polishing, Deburring and cutting dust collection system in compact size for individual machines. Cleantek supply dust collector with suction hoods, shrouds , custom made ductingsetc.. suitable for client applications.

Cleantek design and Manufacturing Compact and Larger capacity model Laser Dust and Fume Filtration Systems. Our laser cutter fume extractor control systems removes 99.9 % of laser fumes and dust particles. Cleantek design and supplying mobile fume extraction unit, Compact Suction Unit, Industrial Fume Extraction System etc..

Experience clean air with Cleantek's industrial solutions: 🌪️ Cyclone Dust Collector: Powerfully remove dust and debris from your workspace. 🌫️ Fume Extractor: Ensure safe air quality for your team. 💨 Compact Dust Collector: Compact design, maximum dust removal efficiency. Cleantek: Your partner for cleaner, healthier workspaces. 🏭 #IndustrialSolutions #CleanAir #DustCollector #SafetyFirst

We are the wood dust collector manufacturers for all kind of wood dust and fine dust collection usage. Our dust collectors are used to attach with CNC router, CNC wood carving machine, wood turning lathe machine, plywood cutting machine, surface planner, Edge bander, Blade grinder etc,.. for dust collection applications. cleantek manufacturing wood dust collector for various wood processing industry.

Welding fumes are a hazardous content of gases and fine dust particles. These are breathed in through the mouth and nose of workers in shop and work floor. World Health Organization point out lung cancer is caused by this welding fumes. Also, gases in welding fumes present further risks to workers health. Very micro substances of welding dust and fume which can injure the respiratory tract, trigger asthma, suffocation, cancer risk etc. Welding Fume Extractor used with suction arm to collect dust particles and fumes from welding process. So, welding fume Extraction or exhaust is mandatory for all kind of welding and other kind of welding process.

Introducing Cleantek's Industrial Vacuum Cleaner – Your Secret Weapon for Dust Annihilation! 🌪️🦸 Unleash the extraordinary power of cleanliness and make dust disappear like magic. Experience the future of industrial cleaning today! 🔮💨 #CleantekMagic #IndustrialCleaning #DustAnnihilation #InnovationUnleashed 🏭✨

Cleantek manufacturing Ring Blower Siemens motor attached model with high efficiency for aeration in Bio floc and STP and ETP Plant. Cleantek make Heavy duty construction with copper winding motor blower for various pressure and vacuum applications. Impeller Fan are manufactured with high quality aluminum alloy and digitally balanced.

• Suction Blower for Garments
• Blower for Wastewater Treatment
• High Pressure Blower for Material Conveying
• Blower for Printing machine
• Dental Suction machinery
• Aquaculture – Fish and Prawn Pond Aeration & Bio floc Fishpond Aeration
• Wastewater treatment, sewage treatment system.
• Pneumatic conveying systems – 
• Powders and Granules Conveying Pharmaceutical machinery – 
• Excess Powder Suction
• Flame Proof Ring Blower
•  Flame Proof Side Channel Blower